PDA

View Full Version : V-Drive Boat BAR



ptc
01-10-2014, 05:49 PM
Yes it has been done again.... saved another one from the scrap heap and gave it a new life as a place for people to sit around and enjoy themselves.... even without WATER!


1970 Wreidt Flat Bottom BAR including refrigerator that will be a kegerator with 2 taps, a bottle shelf, a wet bar area with ice bin and speed rack, an ice chest for all the beeeeeeer you can stock, and the other side is glass and misc storage.

30298302993030030301303023030330304

HB Vic
01-10-2014, 05:51 PM
That's very cool, I like it.

GotHalos
01-10-2014, 06:39 PM
Awesome!! :thumbup:

WMC
01-10-2014, 07:33 PM
Badass dude!!!

RogerThat99
01-10-2014, 07:52 PM
That looks great Paul. The paint work turned out great.

Sent using Tapatalk.

Sharp shooter
01-10-2014, 07:56 PM
Pretty cool!!! :yes:

gregk1
01-11-2014, 06:50 AM
damm now you got me thinking i know where there is the perfect boat to do that with i just got to convince the wife to let me do it

riverrunner1984
01-11-2014, 07:47 AM
What a great idea!

SangerSam
01-11-2014, 04:34 PM
Very nice Paul!! I'll call you when I'm in the area and let you pour me a drink!

ptc
01-12-2014, 04:40 PM
Come on by! -

Had an awesome BOAT BAR break-in, shakedown party.... and it was a blast!!!! its gonna be a great way to enjoy drinking around a dry boat! and the bonfire was good too!~


http://www.performanceboats.com/attachment.php?attachmentid=455913&stc=1&thumb=1&d=1389563976

http://www.performanceboats.com/attachment.php?attachmentid=456065&d=1389568783&thumb=1

http://www.performanceboats.com/attachment.php?attachmentid=456081&d=1389568893&thumb=1

Wendi
01-12-2014, 04:55 PM
Come on by! -

Had an awesome BOAT BAR break-in, shakedown party.... and it was a blast!!!! its gonna be a great way to enjoy drinking around a dry boat! and the bonfire was good too!~


http://www.performanceboats.com/attachment.php?attachmentid=455913&stc=1&thumb=1&d=1389563976

http://www.performanceboats.com/attachment.php?attachmentid=456065&d=1389568783&thumb=1

http://www.performanceboats.com/attachment.php?attachmentid=456081&d=1389568893&thumb=1

Very awesome looks like a great time. Sorry I didn't have enough cozies for your party! Are you going to Needles this year?

ptc
01-13-2014, 05:06 PM
Yep ... will be there with Rogerthat99 (He's getting me out of "The Pen" again :lmao1:)... and we'll be coming on down for a couple days!!!!

I'd drag the boat bar down too but we didnt use "DOT rated" dolly wheels and tires on it..... it might not be capable of freeway speeds without spilling some serious drinkage!!!! :oops:

If anybody has a spare car-trailer, flat or enclosed and wants to haul it down - its available! :thumb:

Wendi
01-13-2014, 07:23 PM
Yep ... will be there with Rogerthat99 (He's getting me out of "The Pen" again :lmao1:)... and we'll be coming on down for a couple days!!!!

I'd drag the boat bar down too but we didnt use "DOT rated" dolly wheels and tires on it..... it might not be capable of freeway speeds without spilling some serious drinkage!!!! :oops:

If anybody has a spare car-trailer, flat or enclosed and wants to haul it down - its available! :thumb: I would do a new post with this question right here. It would be so awesome at the Needles show! Can't wait to see you guys!

ptc
02-05-2014, 10:45 AM
I would do a new post with this question right here. It would be so awesome at the Needles show! Can't wait to see you guys!

I may do it for Needles 2015... when it is all finished and can provide enough booze for "masses".... Billy-B can be the bartender!!!!

WESTERNAERO
02-05-2014, 10:48 AM
It would be nice if you could hinge the back somehow for entry/exit. But with all that weight in there it may fall in on itself.
It is very bitchin.

ptc
02-05-2014, 10:59 AM
It would be nice if you could hinge the back somehow for entry/exit. But with all that weight in there it may fall in on itself.
It is very bitchin.

Yea thats exactly what happened when I cut it out and then had to glass it back in - temporarily!!! So I have a plan to build a Wing on it that you can walk under and it will also provide for glass storage on the underside (like hanging wine glasses) and the top of the wing will be a shelf for 50" big screen TV!!! with power and HDMI cable installed into it too!

The wing will provide for structural support horizontally and vertically and diagonally - so its the best of all really!

Wendi
02-05-2014, 11:04 AM
I may do it for Needles 2015... when it is all finished and can provide enough booze for "masses".... Billy-B can be the bartender!!!!
Party pooper!

WESTERNAERO
02-05-2014, 11:07 AM
Party pooper!

Who you calling names, quitter

ptc
02-05-2014, 11:17 AM
Party pooper!

No poopin here girl!!!! Ill be there.... :party1:

Wendi
02-05-2014, 11:24 AM
Who you calling names, quitter
I ain't no quitter, gutterboy!!!

WESTERNAERO
02-05-2014, 11:34 AM
I ain't no quitter, gutterboy!!!
:biggrin:

2manymustangs
02-07-2014, 01:03 PM
Yea thats exactly what happened when I cut it out and then had to glass it back in - temporarily!!! So I have a plan to build a Wing on it that you can walk under and it will also provide for glass storage on the underside (like hanging wine glasses) and the top of the wing will be a shelf for 50" big screen TV!!! with power and HDMI cable installed into it too!

The wing will provide for structural support horizontally and vertically and diagonally - so its the best of all really!

Im thinking that HUD needs to build one with a BBQ pit/mongolian BBQ built in the hull... :) Maybe with some ZOOMIE pipes on the smoker...

RhinoWood
02-07-2014, 01:20 PM
I think he should too :fishing2::)

2manymustangs
02-07-2014, 01:30 PM
I think he should too :fishing2::)

:partyguy:

ptc
02-07-2014, 03:53 PM
Im thinking I should build one for him! ..... Hud you need a BOAT BBQ? or as the Aussys say a BOAT B'Arby! ....


lol

RhinoWood
02-10-2014, 10:32 AM
3293732938

PTC Milling some cav rod blocks.

HB Vic
02-10-2014, 10:57 AM
3293732938

PTC Milling some cav rod blocks.

Always good to see the machinist smiling when he's whittling means chips are falling in the right spot :D


Sent from my iPhone using Tapatalk

WESTERNAERO
02-10-2014, 11:06 AM
Always good to see the machinist smiling when he's whittling means chips are falling in the right spot :D


Sent from my iPhone using Tapatalk
Or he just took one in the corner of his mouth. :wink2: