PDA

View Full Version : Campbell Repower



Menace Marine
09-19-2013, 12:49 PM
Project is coming to a close and I am just now starting the thread. O well. Better late than never. Here are a few pics and I will get more. Motor is a 468 with iron heads 9.5 to 1 or so compression and a flat tappet hydraulic cam shaft. The owner was less concerned with big power as he was with appearance. We wanted t build it the way somebody would have done it in the 70s when the boat was new.
http://img.tapatalk.com/d/13/09/20/e7y8ehet.jpghttp://img.tapatalk.com/d/13/09/20/hagydy6a.jpg
The paint is similar to Chevy orange but with a lot of metal flake
The valve covers and air filter for custom painted as well
http://img.tapatalk.com/d/13/09/20/2ejydahy.jpghttp://img.tapatalk.com/d/13/09/20/hapapune.jpg
http://img.tapatalk.com/d/13/09/20/9emu5u9y.jpg
Let's not forget the transmission
http://img.tapatalk.com/d/13/09/20/ge2e2ebe.jpg

Menace Marine
09-19-2013, 12:51 PM
Pictures don't do this thing justice. It shines like crazy in the sun.
http://img.tapatalk.com/d/13/09/20/yvary3ur.jpghttp://img.tapatalk.com/d/13/09/20/are9amym.jpg

GotHalos
09-19-2013, 01:19 PM
I like it :thumbup:

WESTERNAERO
09-19-2013, 01:32 PM
How does the waterpump work if it's bolted to the crank?

HB Vic
09-19-2013, 02:05 PM
Looks great! What color is that orange? looks like the same stuff on my SS396.

Menace Marine
09-19-2013, 02:18 PM
How does the waterpump work if it's bolted to the crank?

Base is bolted to the balancer and spins the pump shaft with the motor. The polished arm comes off the block and holds the body keeping it from turning. I know some v drive purists will have a problem with it but mechanically it should work fine. Volvo, many ski boats, and most diesels run this same setup. Motor was originally destined for a jet boat so no cam drive was used. This was the easier cheaper route.

Menace Marine
09-19-2013, 02:19 PM
Just realized the water pump mount is on the motor in these pictures. I will get better ones up soon.

WESTERNAERO
09-19-2013, 02:21 PM
Base is bolted to the balancer and spins the pump shaft with the motor. The polished arm comes off the block and holds the body keeping it from turning. I know some v drive purists will have a problem with it but mechanically it should work fine. Volvo, many ski boats, and most diesels run this same setup. Motor was originally destined for a jet boat so no cam drive was used. This was the easier cheaper route.

Okay, thanks. Kinda interesting, never seen that before.

Menace Marine
09-20-2013, 10:42 AM
http://img.tapatalk.com/d/13/09/21/arazyny5.jpghttp://img.tapatalk.com/d/13/09/21/ugaqesap.jpgyhttp://img.tapatalk.com/d/13/09/21/y6ubujy6.jpg
Not quite done yet but it's getting really close.

78Southwind
09-20-2013, 05:41 PM
Very Nice...how about a picture of the boat?

Menace Marine
09-20-2013, 08:27 PM
Lake test went great. Motor sounds and runs awesome. I will try to get a video up but here are a few more pics.
http://img.tapatalk.com/d/13/09/21/repyqy8e.jpghttp://img.tapatalk.com/d/13/09/21/ese4e3eh.jpghttp://img.tapatalk.com/d/13/09/21/uzazenen.jpghttp://img.tapatalk.com/d/13/09/21/eve8uhas.jpghttp://img.tapatalk.com/d/13/09/21/buvehuge.jpghttp://img.tapatalk.com/d/13/09/21/y4a8adas.jpghttp://img.tapatalk.com/d/13/09/21/seru9ypu.jpghttp://img.tapatalk.com/d/13/09/21/ahuzy6an.jpg

GotHalos
10-01-2013, 07:24 PM
Lake test went great. Motor sounds and runs awesome. I will try to get a video up but here are a few more pics.
http://img.tapatalk.com/d/13/09/21/repyqy8e.jpghttp://img.tapatalk.com/d/13/09/21/ese4e3eh.jpghttp://img.tapatalk.com/d/13/09/21/uzazenen.jpghttp://img.tapatalk.com/d/13/09/21/eve8uhas.jpghttp://img.tapatalk.com/d/13/09/21/buvehuge.jpghttp://img.tapatalk.com/d/13/09/21/y4a8adas.jpghttp://img.tapatalk.com/d/13/09/21/seru9ypu.jpghttp://img.tapatalk.com/d/13/09/21/ahuzy6an.jpg

Came out awesome :thumbup: