Hot Rods or Not

[Boatnaked]

mine is not much of a Hot Rod but I built it!

[WMC]

Bitchen Trucks, what engine, give us some detail??

[GoFastRacer]

THAT is badassss...:encouragement:

[Boatnaked]

424it's a 1955 with a 5.0 out of a lincoln that's had some machine work done, with a offenhauser intake manifold, carter carb, Mallory ignition, timing gear, other than that nothing much, it was just built to be a driver, this is what it looked like after I brought it home and washed it, found it in a barn and gave $700 for it, it also had a Chevy 283 motor
ok I've tried 6 times to post the pix and all I get is a red x

[GoFastRacer]

Hmmm, must be a glitch the first pic is gone too, I'm sure they'll get it fixed up soon..

[admin]

Hmmm, must be a glitch the first pic is gone too, I'm sure they'll get it fixed up soon.. Yes sorry about that. I am doing some work on the site.

[rschap1]

That is a cool truck

congrats

[pumpndump]

This is my 81 gpz project.554555

[bagged97taco]

Heres the hotrod fleet.

Sent from my DROIDX using Tapatalk 2

[HB Vic]

Very cool.

[wannabe]

http://www.wannaberacing.com/smiller.jpg

[HB Vic]

My baby. 69 SS 396. Wish I could drive it everyday.

1454

[Stainless]

Nice rides everyone. Bagged97, your spread all look showroom new!:applouse:

[bagged97taco]

Thanks. They were built to drive, some easier than others. The chop on the merc is intense and makes driving a challenge but awesome. Heres another pic and her little sister, matching baby stroller

Sent from my DROIDX using Tapatalk 2

[GotHalos]

Now that is badass, matching stroller!!:thumbsUp:

[bagged97taco]

The strollers are fun. Kids at the car shows love them. These are some of the others http://img.tapatalk.com/d/12/12/04/ruhagetu.jpghttp://img.tapatalk.com/d/12/12/04/vysena8a.jpg

Sent from my DROIDX using Tapatalk 2

[bagged97taco]

The 32's have working headlights, taillights. Cd player on push handle. Full steering with push handle that the parents steer. Pretty trick stuff.

Sent from my DROIDX using Tapatalk 2

[greg duff]

some junk i built over the years

[greg duff]

more

[GoFastRacer]

And the winner is..:action-smiley-035: :wink2:

http://www.hotboat.com/frm/attachment.php?attachmentid=2420&stc=1&d=1355109919

[sangermike]

Here's my 21 Tub powered by a 302 ,c-4 tranny and ford 8" rear end2510
and my 56 f100 powered by 88 5.0 ho aod tranny 9" ford rear end2511

[papaletch4130]

Mike everything you own is beautiful!! Cant wait to see the Sanger done..

[crackerbox]

What I started with and where it's at today.

270327042705

[GotHalos]

That is amazing, good work! How long did it take and whats under the hood?

[crackerbox]

2711It's been a father son project with my dad and it's been about 12 years. 350 chevy. 4L60 tranny, 9 inch Ford, Four wheel discs. Heidts independent front end. Filled roof. I tried to stay all steel, but ended up with glass rear fenders and a glass rear deck lid. My dads 79 and he's had about 5 strokes in these 12 years but he keeps tickin. The time spent with him has been priceless. Here's a little closer shot of the car and him.

[HOOTER SLED-]

Thanks. They were built to drive, some easier than others. The chop on the merc is intense and makes driving a challenge but awesome. Heres another pic and her little sister, matching baby stroller

Sent from my DROIDX using Tapatalk 2

That Merc is fucking SICK!!! My dream rod.................. someday.

[WMC]

2711It's been a father son project with my dad and it's been about 12 years. 350 chevy. 4L60 tranny, 9 inch Ford, Four wheel discs. Heidts independent front end. Filled roof. I tried to stay all steel, but ended up with glass rear fenders and a glass rear deck lid. My dads 79 and he's had about 5 strokes in these 12 years but he keeps tickin. The time spent with him has been priceless. Here's a little closer shot of the car and him.

Great Post. Thanks

[wolfie]

The wife's car
http://i268.photobucket.com/albums/jj12/wolfie1961/Cars/DSC_0006.jpg

The wife's old car restored for the kid

http://i268.photobucket.com/albums/jj12/wolfie1961/Mustang/DSC_0148.jpg

[EMBRACETHEHATE]

01 cummins low 14s all day 13s with slicks. Alot of fun on the street. Sold it about a year ago


Sent from my DROID RAZR using Tapatalk 2

[bagged97taco]

My moms sled. Part of my wedding theme

Sent from my DROIDX using Tapatalk 2

[WMC]

Nice

Sent from my XT907 using Tapatalk 2

[HB Vic]

My moms sled. Part of my wedding theme

Sent from my DROIDX using Tapatalk 2

'50 Merc right?? Ultimate bad ass ride. I want one bad.

[bagged97taco]

'50 Merc right?? Ultimate bad ass ride. I want one bad.

Yep 50 merc. Her name is veronica. My favorite car my dad has ever built. Also hardest to drive. Damn windows are tiny.

[ptc]

Full race prepped 914-6 was a toy for a number of years

126301263112632

Then built a custom harley.... out of a perfectly good FXDWG....

http://1.bp.blogspot.com/_MwYX6YwSb50/SjBFY9yj36I/AAAAAAAAAtk/SxJuQrkiiVw/s1600/d8+003.jpg

[Underdog Racing]

I dig the funny car - very cool how the flames run through the wing :)

[2FORCEFULL]

my "72" super cheynne,, aluminum head 468 bbc , built turbo 400,leaf spring rear, 12 bolt posi, power steering,brakes, windows,...tilt tach dash ,a/c162901629116292162931629416295

[2FORCEFULL]

16296162971629816299163001630116302163031630416305 16306163071630816309

[270]

My baby. 69 SS 396. Wish I could drive it everyday.

1454

Bad A$$ for sure. :thumbup::thumbup::thumbup:

[Underdog Racing]

Very nice 72 Short Bed

[Paul65K]

some junk i built over the years

Really....................Are you a Plastic Surgeon by trade :boobeyes:
16988

[Karsten]

I just picked up an all numbers matching 1973 Corvette...Still waiting to get it delivered from Florida.

http://imageshack.us/a/img833/6813/u49c.jpg

2006 HD SB with 100 plus HP

http://imageshack.us/a/img824/7459/dscn10356.jpg

1998 FB

http://imageshack.us/a/img171/6056/dscn10264.jpg


Karsten

[Sharp shooter]

Cal speedway took delivery of it's sound wall steel. When the wall is finished NHRA street legal drag racing will proceed next year. I'm planning on making some passes, who's in?

26002

[WESTERNAERO]

Cal speedway took delivery of it's sound wall steel. When the wall is finished NHRA street legal drag racing will proceed next year. I'm planning on making some passes, who's in?

26002
What do you think it will run?
Nice car by the way, 68 & 69 are my favorite chevelles

[WESTERNAERO]

Can't believe these are the only pictures I have of my Nova on the computer, but here it is. I'll have to find some better pics.
Alston front half, 3-link rear with mini tub, 9-inch, 700 lockup trans, small block, full cage, plus a lot more. Runs descent for a pro-tour deal.
2606626067

[Sharp shooter]

Can't believe these are the only pictures I have of my Nova on the computer, but here it is. I'll have to find some better pics.
Alston front half, 3-link rear with mini tub, 9-inch, 700 lockup trans, small block, full cage, plus a lot more. Runs descent for a pro-tour deal.
2606626067

Wow that's nice!! What's powering it? I'd love to have an overdrive trans or a gear vendors, but my car is a real ss so I'm a little reluctant to go there.

I'm running a stock 360 horse 396 with a John Avery tune up. The car has a turbo 400 with 3.73 gears and stock converter. With street tires I'll be lucky to hit mid 13's. In the future I'll be upgrading my powertrain by a couple hundred horsepower.

[WESTERNAERO]

It has a pretty stout 327. Runs surprisingly well for a small cubic inch motor. I used to run it DOT's and it pulled pretty hard for a street deal but now with the radials it just turns the tire all the time, with every shift. The suspension is set up so nice though, it never gets outta shape and just runs straight tire smoke and all.
Don't mind the dirty engine, haven't polished this thing in a while.
26340

[Sharp shooter]

It has a pretty stout 327. Runs surprisingly well for a small cubic inch motor. I used to run it DOT's and it pulled pretty hard for a street deal but now with the radials it just turns the tire all the time, with every shift. The suspension is set up so nice though, it never gets outta shape and just runs straight tire smoke and all.
Don't mind the dirty engine, haven't polished this thing in a while.
26340

Nice!! Just need to hook up your heater. :D

[WESTERNAERO]

Nice!! Just need to hook up your heater. :D

No heater required, It's a hard top, windows are down, always.:action-smiley-035:
It's actually a factory air car, when I first bought it it would get ice on the keys dangling in front of the vents. Amazed me how cold it blew.

[Sharp shooter]

No heater required, It's a hard top, windows are down, always.:action-smiley-035:
It's actually a factory air car, when I first bought it it would get ice on the keys dangling in front of the vents. Amazed me how cold it blew.

I've used my heater maybe twice since 2005, but for some reason I've always felt the heater was a necessity. And my factory AC is all hooked up and in tact (but not working) and I never seem to find the time to mess with it. :D

[MrDenton]

Seen this guy on the freeway Saturday. Someday I will have one...someday. http://img.tapatalk.com/d/14/01/28/5ubebasa.jpg


Blown Gas Flats to Rope...
In loving memory of
Chris "Church Mouse" Blevens

[djunkie]

My hot rod. Drive it daily. Very very mild 350. Passes smog mild. That is when I put a few parts back on it. Lol. It'll roast the tires though. Built 700r4 trans and a built rear with 373's and a Detroit tru trac posi. Fun truck but needs about another 100hp.
31726
31727

[NRI]

Good looking truck djunkie

[NRI]

Can't believe these are the only pictures I have of my Nova on the computer, but here it is. I'll have to find some better pics.
Alston front half, 3-link rear with mini tub, 9-inch, 700 lockup trans, small block, full cage, plus a lot more. Runs descent for a pro-tour deal.
2606626067

That's a hot car westernaero!

[Sharp shooter]

My hot rod. Drive it daily. Very very mild 350. Passes smog mild. That is when I put a few parts back on it. Lol. It'll roast the tires though. Built 700r4 trans and a built rear with 373's and a Detroit tru trac posi. Fun truck but needs about another 100hp.
31726

You ready to make some passes in that thing D? :D

[djunkie]

You ready to make some passes in that thing D? :D

Ha. Not sure any track can handle the fury of all of the maybe 250hp it probably makes. Lol

[Sharp shooter]

Ha. Not sure any track can handle the fury of all of the maybe 250hp it probably makes. Lol

Strap the kid in the car seat (with helmet) and make a pass (that's what I'm gonna do). You gotta plant the seed while they're young. :cool

[djunkie]

Strap the kid in the car seat (with helmet) and make a pass (that's what I'm gonna do). You gotta plant the seed while they're young. :cool

We do that around here now. She says daddy's truck goes vroom vroom. Lol. Where are you running at?

[Sharp shooter]

We do that around here now. She says daddy's truck goes vroom vroom. Lol. Where are you running at?

"WE" are going to run the street legal drags at Fontana probably March 9th. You will be there right? :D

[djunkie]

"WE" are going to run the street legal drags at Fontana probably March 9th. You will be there right? :D

That's way too far in advance for me to make any plans. Lol

[Sharp shooter]

That's way too far in advance for me to make any plans. Lol

You should've showed up today. I had to short shift my passes (5000) so mid 14's were all I was good for. I ran out of gas on my last pass and had to coast off the track. :D


http://www.youtube.com/watch?v=FFyA6BuEexU

[djunkie]

You should've showed up today. I had to short shift my passes (5000) so mid 14's were all I was good for. I ran out of gas on my last pass and had to coast off the track. :D


http://www.youtube.com/watch?v=aCH9xhjvRDU

You should have reminded me.

[Sharp shooter]

You should have reminded me.

I shouldn't have to...:no:

Anyway, there's 1 and sometimes 2 races a month all year. Get your nitrous hooked up and I'll hunt down my RPM problem. :)

[Flusher]

My '69

[Flusher]

Some Cobra replicas that I have done.
35890
35891
35892

[djunkie]

I shouldn't have to...:no:

Anyway, there's 1 and sometimes 2 races a month all year. Get your nitrous hooked up and I'll hunt down my RPM problem. :)

I kinda got a lot on my plate right now so remembering that wasn't gonna happen. Lol. I'd like to go run the truck down the track sometime though. If you're running mid 14's with a big block I'm not too confident about what the truck will do. I'm guessing it'll run well in the 1/8 mile but fall on its face on the big end. With my cam and heads she runs out of steam fast.

[Sharp shooter]

I kinda got a lot on my plate right now so remembering that wasn't gonna happen. Lol. I'd like to go run the truck down the track sometime though. If you're running mid 14's with a big block I'm not too confident about what the truck will do. I'm guessing it'll run well in the 1/8 mile but fall on its face on the big end. With my cam and heads she runs out of steam fast.

Don't gage your expectations based on my pile. I'm running a stock long block and even with it running right- 13's might be a tall order (for now). :bangmyhead:

Well if you want to go, my neighbor and his never been raced before 68 Camaro will be there making the most of things (we hope). :)

[Racer J]

You should've showed up today. I had to short shift my passes (5000) so mid 14's were all I was good for. I ran out of gas on my last pass and had to coast off the track. :D


http://www.youtube.com/watch?v=FFyA6BuEexU

Nice!!
I've never been to that track. I'll have to check it out sometime.

[Sharp shooter]

Nice!!
I've never been to that track. I'll have to check it out sometime.

We're going again April 5th, but there's a good event going on before that. NMCA (http://www.nmcadigital.com/2014_event_schedule/fontana1_ca_preview/)